This article needs attention from an expert in European history, metalworking or mining.March 2010)(
The Copper Age, also called the Eneolithic or the Chalcolithic Age, has been traditionally understood as a transitional period between the Neolithic and the Bronze Age, in which a gradual introduction of the metal (native copper) took place, while stone was still the main resource utilized. Recent archaeology has found that the metal was not introduced so gradually and that this entailed significant social changes, such as developments in the type of habitation (larger villages, launching of fortifications), long-distance trade, and copper metallurgy.
Roughly, the Copper Age could be situated chronologically between the 5th and 6th millennia BCE in places like the archaeological sites of Majdanpek, Јarmovac and Pločnik (a copper axe from 5500 BCE belonging to the Vinča culture). Somewhat later, in the 5th millennium BCE, metalwork is attested at Rudna Glava mine in Serbia, and at Ai Bunar mine in Bulgaria.
3rd millennium BCE copper metalwork is attested in places like Palmela (Portugal), Cortes (Navarre), and Stonehenge (England). However, as often happens with the prehistoric times, the limits of the age cannot be clearly defined and vary between different sources.
Inception of metallurgy in Europe
The theory that metallurgy was imported into Europe from the Near East has been practically ruled out. A second hypothesis, that there were two main points of origin of metallurgy in Europe, in southern Spain and in West Bulgaria, is also doubtful due to the existence of sites outside the centers of diffusion where metallurgy was known simultaneously with, or before, those in the ‘original’ nuclei, such as Brixlegg (Tyrol, Austria), while sites closer to the supposed origins of metallurgy, such as in the north of Spain, show fewer metal artifacts than sites in the south and practically no evidence of production (Perez Arrondo 1986).
Currently, the general opinion is that the development of metallurgy took place independently in different places, at different times, with various techniques. One fact that supports this interpretation is that, although the final products (beads, rings, sickles, swords, axes, etc.) are quite similar throughout Europe, the method of production is not. Thus the use of crucibles was the technique utilized in the south of Spain, whereas central Europe employed a slagging process, but Cabrierés (France) used a primitive oxidizing non-slagging process (Bourgarit, et al. 2003), while in the British Isles the absence of debris, slag or ceramic suggests another technique (Craddock 1995).
Consequently, the way in which metallurgy was initiated differs considerably depending on the region. There are areas in which copper seems to play a crucial role (i.e., the Balkans), whereas other areas show no interest in it at all. Then there are societies that use copper artifacts but do not practice metallurgy (Mohen 1992; 71), and there are other ones that fully adopt some of the cultural innovations but ignore the rest. One example of the latter is Basque country in northern Spain, where splendid large dolmens are present along the Ebro river, but metal is rather infrequent, and when it does appear between the trapping, it is more often bronze or arsenical copper than copper (Cava 1984).
Reasons to use copper
Copper is the eighth most abundant metal in the Earth's crust, is available all over the world, and is one of the few that can appear in a pure state (Atkinson 1987). It is not complicated to work with, and a bare hammering can be enough to transform a nugget into a bead. The eye-catching look of native copper makes it easy to recognize, and even flashier if converted into jewelry, a possible motivation for humankind to start the metallurgy with it. An evolutive technological process (Coghlan 1975, Mohen 1992; 48) has been described, although there are authors like Javinovic (Mohen 1992; 52) who think that it is not necessary to pass through the first stages to reach the last one.
To start with, the raw material must be obtained. Copper can be found in over 160 different minerals (Atkinson 1987), but mining activities are entailed to obtain them in large quantities if a reasonable amount of copper is wanted. Some of the most commonly exploited minerals are cuprite, malachite, azurite, chalcopyrite, chrysocolla and tennantite; e.g. malachite was extracted in Rudna Glava (Serbia), Cabrierés (France) or Chinflón (Riotinto, Spain). In fact, one of the possible explanations about what Ötzi the Iceman, the ancient mummy found in the Alps who lived around 3300 years BCE, was doing at 3,210 metres (10,530 ft) of altitude is that he could have been prospecting for new ores of minerals (Peroni 1996; 336).
Lastly, a wide range of specific tools and resources have to be available, such as furnaces, moulds, crucibles, mauls, etc.
- Stage A: Although native copper nowadays is frequently displayed in museum showcases of mineral collections, it once occurred copiously during prehistoric times. In Cyprus or Crete, collecting the mineral was once as easy as simply picking it up from the ground. In fact, native copper is no longer as easy to find in that state these days. The treatment of this native mineral was also uncomplicated through cold-hammering. This only permitted the production of a limited range of artifacts like awls, pins, or beads. In larger objects, the metal cracks when it is cold-hammered.
- Stage B: Annealing the metal on an open fire (200–300 °C or 390–570 °F is hot enough) reduces its hardness considerably and gives in malleability. This permits the manufacture of slightly more sophisticated objects, like bracelets, but is still a rather limited technique.
- Stage C: In the first two steps, the mineral used was native copper that does not actually need specialized technology. Probably, due to the situation that native copper was increasingly difficult to find, copper ore is used in this third step. This is a very significant development. In fact, this is truly the beginning of the metallurgy, as the mineral has to be smelted to separate the copper from the gangue, requiring technology.
Early mining in Europe
Minerals of copper were known from ancient times. In Crete, little fragments of malachite and azurite were powdered and used as make up or to decorate ceramic in an early date such as 6000 BCE (Mohen 1992).
Therefore, the minerals were not collected because people were looking for copper but for virtues like those mentioned or simply because of its brightness and colour, but this knowledge of the minerals is critical since they already knew how to recognize them and where to collect them when, later, they started the systematic search for ores.
Numerous examples of mines are known all over Europe (Craddock 1980, Mohen 1992 and 1996, Shennan 1999, Bartelheim et al. 2003) from the east: Rudna Glava (Serbia), Ai Bunar (Bulgaria); to the west: Mount Gabriel (Ireland), Great Orme, Alderley Edge (United Kingdom); crossing Central Europe: Mitterberg (Salzach, Austria), Neuchâtel (Switzerland), Cabrierés (France); to the south: Riotinto, Mola Alta de Serelles (Spain); and the Mediterranean: Corsica, Cyprus, and the Cyclades islands. It is remarkable that, usually, it is not a single mine but a complex, with a variable, large number of mineshafts, as in Rudna Glava (30) or Mount Gabriel (31).
Techniques and tools
The techniques observed in all of them are quite similar. Basically they used the thermic alteration or firesetting (Mohen 1992, Craddock 1995, Eiroa et al. 1996, Timberlake 2003). This consists of applying fire to the rock and then pouring water over it: the rapid changes of temperature will cause cracks within the rocks that can be totally broken with the help of mauls and picks. Then the useful masses were selected, crushed and transported to the production centre that could be in the surrounding area (Mitterberg) or far away (Rudna Glava).
The mines were exploited in extremely efficient and clever ways, according to the technology available (Jovanovic 1980, Craddock 1995, Timberlake 2003). The entire convenient mineral was collected and the abandoned shafts carefully refilled with gangue and rocks (Mohen 1992; 85). For example, at Mount Gabriel, it was estimated that they extracted the astonishing number of 32,570.15 tonnes (35,902.44 tons) of rock, gangue and ore. The usable amount of copper was 162.85 tonnes and the final smelting finished metal was 146.56 tonnes (Jackson 1980; 24). The entire process was thoroughly described in 1744 by Lewis Morris, Crown Mineral Agent for Cardiganshire, and, incidentally, antiquarian (Timberlake, 2003, 22):
|“||Their method seems to be this. They make a great fire of wood in the bottom of their rakes which were always open up on that account, and when the rock was sufficiently hot they cast water upon it, which shiver’d it; and then with stone wedges, which they drove in with other stones, they work’d their way through the hardest rocks, tho’ but slowly.||”|
The tools employed are mainly presented in Lewis' observations, but other ones have been recovered in archaeological context:
- Stone tools: The most frequent find are the stone hammers, normally made of hard rocks accessible to the mine, beach or river pebbles (Jovanovic 1980, Craddock 1995). There is no standardization of these mauls but is common a system of hafting, usually a groove carved in the middle for where a rope was tied to the handle, like the twisted hazel recovered in Copa Hill (Timberlake 2003; 32-33).
- Antler and bone tools: Picks and scrapes made of bone and antlers have been found in the majority of the mines (Craddock 1995).
- Wood: Evidence of wooden tools are more infrequent. Nevertheless in places like Ai Bunar or Mount Gabriel were recovered shovels and wedges. A rudimentary system of stairs or scaffoldings can be supposed (Mohen 1992).
- Metal: The use of any metallic tool is rather strange and extraordinary. It seems that the copper was not used for the miners' tools. However copper chisels and discarded axes could be utilized as wedges. (Craddock 1995; 97)
- Other evidence: The presence of coal and charcoal, crucial for the firing (fire-setting) and furnace (fuel), is habitual. Leather sacks (at Ai Bunar) and shoulder baskets (at Copa Hill) were used to transport the crushed mineral.
The information available about the people of the Copper Age has not substantially increased along with the number of archaeological sites. Several ideas have been proffered, one of the most followed is that the metal itself did not bring abrupt transformation into the people's life (Cunliffe 1998) or even more that ‘early copper does not produce anything useful at all’ (Renfrew 1986, 146), meaning with this that with the copper, they produced mainly jewellery and, overall, weapons that obviously were not within reach of the majority of the population but only to privileged individuals. In other words, the real importance of the metal is not utilitarian but social. This is a suitable explanation about the rising of Great Cultures of Metal such as Vinča culture (Ex-Yugoslavia) Tiszapolgar and Unetice culture (Central Europe), Remedello and Rinaldone (Italy), Montagne Noire (France), El Argar and Targas (Spain), etc.
As the period moved forward, especially around the 3rd millennium, new and complex realities would appear strongly linked to the metal, like the impressive fortified villages of Los Millares (Spain), Vila Nova de Sao Pedro (Portugal) or the more modest cairn next to Copa Hill (United Kingdom) apparently destinated to control the centres of extraction, or the equally stunning and generalized cultural phenomenons of Megalithism, Rock Art, Bell Beakers Vessels… that are known from Scandinavia to the South of Spain and from Scotland to Turkey.
- Neolithic Vinča was a metallurgical culture Stonepages from news sources November 2007
- Tasić, 1995, p. 157.
- http://www.muzeuluniriialba.ro/docs/apulum/articole/40.%20sentmiklosi.pdf[permanent dead link]
- Atkinson, R.L (1987): Copper and copper mining. Princes Risborough: Shire, album 201.
- Bourgarit D. et al. (2003) Chalcolithic Fahlore Smelting at Cabrierés: Reconstruction of Smelting Processes by Archaeometallurgical Rinds, in Archeometallurgy in Europe (International Conference) vol. 1 Milano: Associacione Italiana di Metallurgia, pages 431-440.
- Bartelheim M, et al. (2003) Chalcolithic metal extraction in Brixlegg, Austria in Archeometallurgy in Europe (International Conference) vol. 1 Milano: Associacione Italiana di Metallurgia, pages 441-447.
- Cava, A. (1984): La industria lítica en los dólmenes del País Vasco meridional in Veleia 1, Vitoria-Gasteiz, pp. 51–146.
- Moreno A, et al. (2003) Metallurgical control and social power. The Bronze Age Communities of High Guadalquivir in Archeometallurgy in Europe (International Conference) vol. 1 Milano: Associacione Italiana di Metallurgia, pages 625-634.
- Coghlan, Herbert Henery (1975): Notes on the prehistoric metallurgy of copper and bronze in the Old World, including an examination of specimens from the Pitt Rivers Museum and bronze casting in ancient moulds by E. Voce and contributions by P.R.S. Moorey and T.K. Penniman. Oxford: Printed at the Oxford University Press, 2nd ed.
- Cvekic, Ljilja (2007) Prehistoric women had passion for fashion. 
- Craddock, P.T (1986) Bronze Age Metallurgy in Britain in Current Anthropology vol. 9, nº4, pages 106-109.
- Craddock, P. T (1995) in Early metal mining and production by Craddock, P. T, Edinburgh University Press, pages 23–31
- Eiroa, J.J. et alii (1999): Nociones de tecnología y tipología en Prehistoria. Barcelona. Ariel.
- Jackson J.S. (1980): Bronze Age copper mining in Counties Cork and Kerry, Ireland, in Scientific studies in early mining and extractive metallurgy / edited by P.T. Craddock. London: British Museum, pages 9–30.
- Jovanovic B. (1980): Primary copper mining and the production of copper, in Scientific studies in early mining and extractive metallurgy / edited by P.T. Craddock. London: British Museum, pages 31–40.
- Mohen J.P (1992): Metalurgia Prehistórica. Introducción a la paleometalurgia. Barcelona: Masson
- Mohen J.P, Peroni, R, Katinchorov R. and Tasié R, Eccedy I. and Kovacs T, Merpert J.M, Briard J., Thrane H., Kaelas L. (1996) Europe in the Copper Age, in History of humanity: scientific and cultural development Vol.2, From the third millennium to the seventh century BC, edited by Dani A.H., J.-P. Mohen. London: Routledge; Paris: UNESCO, pages 320-391.
- Ortiz T., L. et al. (1990): El hábitat en la Prehistoria en el valle del Río Rojo (Álava) "Cuaderno de Sección Prehistoria-Arqueología", núm. 3, San Sebastián.
- Perez Arrondo, C.-López de Calle, C. (1986): Aportaciones al estudio de las culturas Eneolíticas en el valle de Ebro. II Los orígenes de la Metallurgia. Instituto de Estudios Riojanos, Logroño.
- Ruiz-Taboada, A. & Montero-Ruiz, I., "The oldest metallurgy in western Europe" in Antiquity by Crawford, Osbert Guy Stanhope, 73(282), Princeton University Press for the Research Institute on International Change, Columbia University, 1999, pages 897-903.
- Shennan, S., "Cost, benefit and value in the organization of early European copper production" in Antiquity by Crawford, Osbert Guy Stanhope, 73(280), Princeton University Press for the Research Institute on International Change, Columbia University, 1999, pages 352-363.
- Timberlake, S. 2003, "Early mining research in Britain: The Developments of the Last Ten Years" in Mining and metal production through the ages by Craddock, P. T, Lang, Janet, British Museum, pages 22–42.
- Renfrew C. (1986) Varna and the emergence of wealth in prehistoric Europe in The social life of things, edited by Anjuin Appaduri. Cambridege University Press.